多种自动录制模式和模式自动切换

THINKWARE 行车记录仪支持多种自动录制模式，可以根据需要选择相应模式：正常录像、事故录像和位移检测录像。

通过电源线，行车记录仪一直连接在车辆电源插座上，无需手动开启或关闭，这些模式就会根据情况自动切换。

正常录像

这是标准录像模式，启动发动机时，它便自动启用。确保行车记录仪成功启用，并持续记录驾驶数据。

录像以一分钟的片段保存，电池无需充电或更换。

事故录像

与动作摄像机不同，THINKWARE 行车记录仪配备内置陀螺传感器，无论车辆是行驶状态还是停车状态，一旦检测到撞击，录像便会开始。任何重大的撞击都会触发即时录像，并保存撞击前后 10 秒的影像。

停车录像模式和正常录像模式间自动切换

在切换到停车模式前，THINKWARE 行车记录仪会检测电压，确保发动机已停止运作。停车模式会启动位移检测录像，记录行车记录仪传感器周围物体位移触发的重要影像。

重新启动发动机时，THINKWARE 行车记录仪会自动切换到正常录像模式。

* 如安装了可持续供电的电源线，即可支持模式自动切换和位移检测录像（停车模式）。

位移检测录像

在位移检测录像模式下，传感器一旦检测到任何位移，THINKWARE 行车记录仪便开始录像。它还能检测并记录车辆附近接近或潜伏之人的运动。

Provides driving information and records the severity of impact

By using GPS, THINKWARE Dash Cam stores the speed and location where your car has been driven.You can find the speed and direction of your carat the moment of impact as well as the direction and severity of the collision. In addition to recording in video and sound, it keeps a record of your driving history using GPS and the built-in sensors. All these information information can be viewed on the THINKWARE Dash Cam PC or MAC viewer.

* The above-mentioned features are available only with the built-in GPS or when using the GPS accessory that is sold separately.

Support two channels for rear-view recording

THINKWARE Dash Cam supports the use of a rear-view camera to record any objects approaching from behind.It records with both the front and rear-view cameras at the same time, and if necessary, interior of a car or the sides as well.It is very useful for identifying a person or car that has damaged your car.

Special features for car recording

Dual Save Technology

This technology is specially designed to save recorded footage in both MicroSD and NAND Flash Memory when a certain level of impact is detected. This is particularly useful if a microSD card is removed or damaged due to a collision. As THINKWARE Dash Cam also saves footage in the NAND Flash Memory, you can prevent it from getting lost or damaged. The video files stored in NAND Flash Memory are accessible via the THINKWARE DASH CAM PC or MAC viewer.

* Dual Save Technology is activated when a certain level of impact is detected as long as it is connected to a power supply. (The detection threshold can be adjusted by the user.)

* This feature is only available for certain models.

Super Clearing Technology

THINKWARE Dash Cam uses Super Clearing Technology to correct the image and improve its quality when the background is too dark or too bright.With the built-in SONY Exmor CMOS image sensor, Super Clearing Technology adjusts the level of exposure, contrast, and noise to make the picture clearer, even in bad weather conditions or at night.

Wide Viewing Angle

THINKWARE Dash Cam uses a wide angle glass lens and offers a wide range of observation without missing the smallest details.With a 140 degree viewing angle, it captures both the front and side views and efficiently records moving objects.

Specifically designed for car mounting

THINKWARE Dash Cam is designed to capture video footage with the best angle and stability.It is securely mounted to the windshield and rear window to record in a stable manner while minimizing glare.You can mount it in any location using 3M adhesive tape to avoid blocking the driver's view of the road.The rear-view camera rotates 360 degrees and can be mounted to any type of cars and interior configuration (e.g. curtain) with ease.